Vrták Bosch Expert SDS plus-7X, 1 ks

Twist drill bit Bosch Expert SDS plus-7X 1.6 cm is an SDS‑plus hammer bit designed for rotary hammer drills and intended for drilling holes in reinforced concrete and other hard materials. The 1.6 cm diameter bit features a Full Carbide Head and Bosch Carbide Technology to increase tip durability and resist wear during heavy-duty use. The product is supplied as a single bit with package dimensions 16 mm depth and 265 mm height.

Advantages

The EXPERT SDS plus-7X combines a Full Carbide Head with a four-cutter design to reduce jamming in rebar and deliver consistent cutting performance. Bosch Carbide Technology at the tip and a highly resistant welded connection improve impact resistance and extend tool life compared with standard two-cutter bits. The construction is optimized for frequent drilling in concrete and reinforced concrete while preserving tip geometry under load.

Suitable for

• Drilling holes in cured concrete
• Drilling hardened reinforced concrete
• Drilling hard stone such as granite and gneiss
• Fixings and installations in construction and renovation work

Key specifications

• Brand: Bosch
• Model: Expert SDS plus-7X
• Diameter: 1.6 cm (16 mm)
• Shank type: SDS‑plus
• Head: Full Carbide Head, 4-cutter design
• Pack contents: 1 drill bit
• MPN: 2608900131
• EAN: 4059952532042
• Package dimensions: depth 16 mm, height 265 mm

How to use

Fit the SDS‑plus shank securely into a compatible rotary hammer drill. Select the hammer drilling mode and set the correct drill speed according to the material hardness. Position the bit on the marked drilling point, start drilling with steady axial pressure, and allow the hammer action to break material while the carbide cutters remove debris. Withdraw periodically to clear dust and ensure cooling when drilling deep holes. Replace the bit if significant wear or deformation of the carbide head is observed.

Recommendations

For best results when drilling reinforced concrete, use a rotary hammer with SDS‑plus chuck, wear appropriate personal protective equipment, and combine the Bosch Expert SDS plus-7X with progressive drilling technique: moderate feed force, intermittent withdrawal to clear debris, and correct speed settings for the material.