SFP+ transceiver modul BlueOptics 407-BBPC-BO 10000 Mbit/s optický kabel

The BlueOptics 407-BBPC-BO SFP+ transceiver module is a compact fiber optic device designed for 10 Gigabit Ethernet links. It supports a maximum data transfer rate of 10000 Mbit/s and is built for short-reach fiber connections with a maximum transfer distance of up to 300 m. The module uses an LC fiber connector, comes in a silver housing, and has a small, lightweight form factor that simplifies installation in compatible SFP+ ports.

Advantages

The transceiver offers a standard SFP+ form factor compatible with many network switches and media converters, delivering up to 10 Gbit/s throughput in fiber-based networks. Its compact size and low weight (approximately 20 g) make handling and installation straightforward. Designed with a high mean time between failures (MTBF) it provides stable operation for continuous network use while the LC connector enables reliable duplex fiber connections.

Suitable for

• Short-reach 10 Gigabit Ethernet links within data centers
• Fiber uplinks between switches and routers
• Server to switch connections requiring 10 Gbit/s bandwidth
• Network refresh or upgrades where SFP+ modules are supported

Key specifications

• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Maximum transfer distance: 300 m over multimode fiber
• Ethernet interface type: 10 Gigabit Ethernet
• Fiber optic connector: LC duplex
• Form factor: SFP+
• Product colour: Silver
• Weight: 0.02 kg
• Reliability indicator: MTBF approximately 1,000,000 hours

How to use

Insert the SFP+ transceiver into a compatible SFP+ slot on your switch, router, server or media converter until it clicks into place, then connect LC-terminated fiber optic patch cords to the module. Ensure the connected fiber type and cable lengths are suitable for short-reach operation (up to 300 m). After physical installation, verify link status and configure the network device if necessary for 10 Gigabit operation and desired interface settings.

Recommendations

Use quality multimode fiber and LC patch cords that match the intended reach to maintain signal integrity. Handle the transceiver by its housing, avoid touching the connector endfaces, and keep dust caps on until connection. Confirm compatibility with your network equipment and firmware to ensure proper link negotiation at 10 Gbit/s.