SFP+ transceiver modul BlueOptics 3HE05037AA-BO 10000 Mbit/s

The BlueOptics 3HE05037AA-BO SFP+ transceiver module provides a compact solution for 10 Gigabit Ethernet fiber connections with a maximum data transfer rate of 10000 Mbit/s. Designed in an SFP+ form factor with a silver housing and LC fiber connector, this module supports single‑mode fiber runs up to 10000 m and is intended for use in switches, routers and media converters that accept SFP+ modules. The product specification includes a high mean time between failures (MTBF) of 1000000 hours, reflecting suitability for continuous network operation.

Advantages

The module’s SFP+ form factor ensures compatibility with a wide range of network devices that support pluggable transceivers, while the LC connector and support for long-distance single‑mode links enable flexible deployment across campus and data center environments. Its lightweight silver housing and standardized interface simplify installation and replacement without requiring changes to existing cabling or equipment. The rated MTBF indicates reliability for sustained operation in critical network segments.

Suitable for

• 10 Gigabit Ethernet uplinks between switches and routers
• Long‑reach single‑mode fiber connections up to 10 km
• Data center and enterprise backbone links
• Replacement or expansion of SFP+ slots in compatible network equipment

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 10000 m (single‑mode fiber)
• Ethernet interface type: 10 Gigabit Ethernet
• Fiber optic connector: LC
• Form factor: SFP+
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1000000 hours

How to use

Insert the BlueOptics SFP+ module into a compatible SFP+ slot on a switch, router or media converter while the host device is powered down or supports hot‑swapping. Connect the LC‑terminated single‑mode fiber patch cable to the module’s LC connector. Verify link status and speed via the host device’s management interface; ensure the device supports 10 Gigabit Ethernet and the transceiver type. For optimal performance, follow equipment vendor guidelines for link configuration, optical power margins and diagnostics.

Recommendations

Use certified single‑mode LC fiber patch cords and follow industry‑standard handling procedures to avoid contamination of the optical interfaces. Confirm compatibility with the host device and update device firmware if required to ensure stable operation at 10 Gbit/s.