SATA kabel samec/samec DeLOCK 0,7m žlutý 82826

This SATA cable by Delock complies with the latest SATA standard and supports data transfer rates up to 6 Gb/s. It is a 0.7 m male-to-male cable with a yellow jacket designed for internal connections between SATA devices such as hard drives, controller cards or SATA flash storage. The connector orientation routes the cable to the left when plugged into a drive. The SATA 6 Gb/s interface is downward compatible with earlier SATA versions, in which case the connection will operate at the lower supported speed. Metal clips on the SATA connector provide additional snap-in retention.

Advantages

The cable supports SATA III (6 Gb/s) transfer rates and remains compatible with older SATA standards. Its 0.7 m length fits typical internal routing inside PC cases, and the yellow color helps identify connections. Metal clips on the connectors improve retention and reduce accidental disconnection.

Suitable for

• Connecting internal SATA hard drives (HDD)
• Connecting SATA controller cards to storage devices
• Connecting SATA flash storage or optical drives inside a PC

Key specifications

• Brand: DELOCK
• Model / MPN: 82826
• Type: SATA male — SATA male
• Length: 0.7 m
• Colour: Yellow
• Maximum data transfer rate: 6 Gb/s (SATA III), backward compatible

How to use

Power off the system before connecting or disconnecting SATA devices. Align the SATA connector with the drive's SATA socket and insert until the metal clip engages. When connecting to a hard drive the cable will route to the left side of the connector. After connecting, secure any drive mounting and restore power to the system to detect the device.

Recommendations

Use this cable for internal PC installations; avoid sharp bends and excessive force when routing to preserve signal integrity and connector retention. For best performance, ensure both connected devices support the desired SATA speed.