Optický transceiver modul BlueOptics JL740A-BO 10000 Mbit/s SFP+

The BlueOptics JL740A-BO 10000 Mbit/s SFP+ is a fiber optic transceiver module designed for 10 Gbps optical links in data center and enterprise networks. It uses an SFP+ form factor with an LC simplex connector and supports 10GBASE-BX-D operation, providing bidirectional transmission on a single fiber with separate wavelengths for transmit and receive. The module is silver, weighs approximately 20 g and meets CE, FCC and RoHS regulatory standards. With an MTBF of 3,000,000 hours, it is intended for sustained, high-availability optical connections.

Advantages

The JL740A-BO provides 10 Gbit/s throughput in a compact SFP+ package compatible with common network hardware platforms that follow MSA and HPE compatibility guidelines. It supports Digital Diagnostics Monitoring (DDM/DOM) compliant with SFF-8472 for real-time monitoring of supply voltage, laser current, optical output/input power and temperature. Production uses high-quality optical lasers and IC components to achieve extended service life and reliable operation in demanding environments.

Suitable for

• 10 Gbps uplinks between switches and routers
• Interconnects for storage systems and SAN fabrics
• High-speed links in aggregation and distribution layers
• Fiber connections where LC simplex and single-fiber bidirectional links are required

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical standard: 10GBASE-BX-D (bidirectional single-fiber)
• Connector: LC simplex
• Transmit wavelength: 1330 nm (typical for BX-D transmit)
• Receive wavelength: 1270 nm (typical for BX-D receive)
• Form factor: SFP+
• Color: Silver
• Weight: 0.02 kg
• DDM/DOM support: Yes, SFF-8472 compliant
• MTBF: 3,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Install the JL740A-BO into an SFP+ port of a compatible switch, router or storage device following the host vendor's hot-plug and ESD handling procedures. Connect an LC simplex fiber patch cable to the module and to the corresponding remote transceiver or patch panel, observing correct polarity for bidirectional single-fiber links. Verify link status and use the host management interface to monitor DDM parameters if supported by the host device. Ensure the connected fiber type and link budget meet the 10GBASE-BX-D requirements for the intended distance.

Recommendations

Use this module in hardware platforms and firmware versions that support MSA-compliant SFP+ transceivers and DDM functions. Choose quality single-mode fiber and matched LC simplex patch cables for optimal performance, and monitor DDM parameters to detect degradation in optical power or temperature over time.