Optický transceiver BlueOptics 2129A-BO 10000 Mbit/s SFP+

The BlueOptics 2129A-BO 10000 Mbit/s SFP+ is a fiber optic transceiver module designed for high-speed network links. Housed in a compact SFP+ form factor and finished in silver, this module supports up to 10 Gbit/s data transfer and is intended for use in compatible switches, routers and network interface cards. The device is manufactured to meet CE, FCC and RoHS standards and has a rated mean time between failures (MTBF) of 1,000,000 hours.

Advantages

The transceiver offers a compact SFP+ interface that enables flexible deployment in dense networking environments. With a maximum data transfer rate of 10000 Mbit/s, it supports high-bandwidth applications while maintaining low weight for easy handling and installation. Compliance with CE, FCC and RoHS provides assurance of regulatory conformity and reduced environmental impact.

Suitable for

• 10 Gbit/s uplinks between switches and aggregation devices
• High-speed connections to servers and storage systems
• Fiber backbone links in data centers and enterprise networks
• Replacement or upgrade of existing SFP+ transceiver modules

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Form factor: SFP+ compact transceiver
• Product colour: Silver
• Weight: 0.02 kg
• MTBF: 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Insert the BlueOptics 2129A-BO into an available SFP+ port on a compatible network device while the host port is powered off or according to the host device hot-swap guidelines. Connect the appropriate fiber optic cable to the transceiver's optical interface, ensuring correct connector type and polarity. Configure link settings on the network device as required; most hosts will auto-negotiate or detect the transceiver automatically. Verify link status and perform any necessary testing to confirm expected throughput and signal integrity.

Recommendations

Use quality single-mode or multimode fiber and compatible connectors as specified by your network design. Avoid handling the optical interface directly; keep protective caps on when the transceiver is not connected. Verify compatibility with the host device firmware and hardware to ensure full performance at 10 Gbit/s.