Microconnect PE011418 Microconnect PE011418

Y-type power supply cable with plastic encapsulation, combining a Schuko plug with two IEC couplings: one C13 and one C5 connector. The cable is intended to split a single mains connection into two appliance feeds, for example to power a notebook and an additional device from one outlet. Constructed with H05VV-F insulation for reliable everyday use.

Advantages

The Microconnect PE011418 provides a compact Y-shaped solution to feed two devices from a single Schuko socket while keeping connectors separately insulated. It uses standard IEC C13 and C5 terminations compatible with many power supplies and notebooks. The cable lengths are sized to connect nearby equipment without excess slack, and the H05VV-F cable material ensures flexibility and common mains safety ratings.

Suitable for

• Connecting a notebook (C5) and a second appliance (C13) to one Schuko mains socket
• Desktop and small office setups where two low-power devices share one outlet
• Temporary power arrangements for peripherals near the same power source

Key specifications

• Model: Microconnect PE011418
• Connections: Schuko plug to 1× IEC C13 + 1× IEC C5
• Schuko cord conductor size: 1.0 mm², length approx. 1.8 m
• IEC branch conductor size: 1.0 mm², length approx. 0.2 m
• Cable material: H05VV-F 3G x 1.0 mm²
• EAN: 5715063471975

How to use

Insert the Schuko plug into a properly rated mains socket. Connect the IEC C13 and C5 couplings to the corresponding appliance power inlets (C13 for common equipment such as monitors or power supplies, C5 for compatible notebook adapters). Ensure each connected device's power rating does not exceed the capacity of the mains outlet and distribution. Route the cable to avoid strain on connectors and prevent tripping hazards.

Recommendations

Do not use this cable to combine outputs from different power sources. Verify appliance current draw before connecting multiple devices; avoid exceeding the socket or fuse rating. Use in dry indoor environments and inspect the cable periodically for damage; replace if insulation or connectors are compromised.