Lindy 1m USB Type-C na DP 8K60 adaptérový kabel

The Lindy USB Type C to DisplayPort 8K60 Adapter Cable (1 m) connects a USB-C host supporting DisplayPort Alternate Mode to a DisplayPort monitor. The single-cable solution transmits video and uncompressed multi-channel audio, supports HDR, and draws power from the USB bus so no external power supply is required. The 1 m length provides flexibility when positioning a DisplayPort display for desktop, retail or AV installations.

Advantages

This adapter cable supports resolutions up to 7680 x 4320 at 60 Hz and 3840 x 2160 at 144 Hz, enabling high-resolution workflows such as 8K streaming and video editing. HDR support provides increased brightness, improved contrast and a wider colour gamut. The plug-and-play design requires no drivers and is compliant with CE, REACH and RoHS standards for safety and environmental requirements.

Suitable for

• Connecting laptops or tablets with USB Type-C (DisplayPort Alt Mode) to DisplayPort monitors
• 8K game streaming and high-resolution video editing
• Retail displays, sports bars and home cinema AV setups
• Workstations requiring uncompressed multi-channel audio and high-resolution video

Key specifications

• Connectors: USB Type-C to DisplayPort
• Maximum resolution: 7680 x 4320 @ 60 Hz; 3840 x 2160 @ 144 Hz
• HDR support: Yes
• Cable length: 1 m
• Colour: Black
• Power: USB bus-powered (no external PSU required)
• Compliance: CE, REACH, RoHS

How to use

Plug the USB Type-C connector into a compatible host device that supports DisplayPort Alternate Mode, then connect the DisplayPort end to the monitor. The cable is bus-powered and requires no additional power source. Once connected the display should be detected automatically; configure resolution and refresh rate in the host operating system or display settings as needed.

Recommendations

For optimum performance, use with devices that explicitly support DisplayPort Alternate Mode over USB-C. To achieve 8K60 or 4K144 outputs ensure the host GPU and display both support the desired resolution and refresh rate and use appropriate display settings. Avoid sharp bends near the connectors and keep cable length within 1 m for best signal integrity.