Účet Kontakt
Váš košík
DPD a FedEx – termín doručení najdete u produktu
Potřebujete poradit? Zeptejte se naší AI

Legrand TX3 jistič miniaturní jistič typ C 1

Legrand TX3 jistič miniaturní jistič typ C 1
Legrand TX3 jistič miniaturní jistič typ C 1
482,78 Kč
PDF
PDF
Dostupnost 151 Kód 2230522 Model 403434 Záruka 2 roky

Doprava a vrácení zboží

Předpokládané doručení úterý 8. prosince
Budeme vás průběžně informovat prostřednictvím našeho podrobného systému sledování zásilek
Možnosti platby
Platební kartaVisaMastercardPayPalApple PayGoogle PayBankovní převod

Položte otázku – AI asistent odpoví hned.

Popis

Single-pole circuit breaker Legrand 403434 rated 16 A at 230 V provides overcurrent protection for residential and light-commercial electrical installations. The device is designed to interrupt faulty currents, protecting wiring and connected equipment from overload and short-circuit conditions. Its compact form factor allows DIN-rail mounting inside standard distribution boards, enabling neat integration and straightforward manual reset after a trip.

Advantages

This single-pole breaker offers consistent thermal-magnetic tripping characteristics suitable for general-purpose circuits. The compact DIN-rail compatible housing reduces panel space usage and simplifies installation. Manual reset functionality provides clear status after activation and allows fast restoration of service once the cause of the trip has been addressed. Construction and contact design are intended to deliver reliable operation over repeated switching cycles.

Suitable for

Key specifications

How to use

Install the breaker on a standard DIN rail inside a distribution board following local electrical codes and safety practices. Connect the incoming phase conductor to the supply terminal and the load conductor to the output terminal, ensuring proper tightening torque on terminals and secure earth and neutral connections in the panel as required. After installation, switch the device to the ON position to energize the circuit; if the breaker trips, identify and rectify the fault or overload before performing a manual reset to the ON position.

Recommendations

Verify compatibility with circuit conductors and downstream device ratings before installation. Use the breaker in circuits with appropriately sized conductors and coordinated protective devices. Periodically inspect terminal tightness and the cabinet environment for dust, moisture, or heat accumulation that can affect performance.

Hlavní vlastnosti
  • Protection of lighting and socket circuits in apartments and houses
  • Overcurrent protection for small commercial or office distribution panels
  • Integration into modular DIN-rail distribution boards and subpanels
  • Poles: single-pole (1P)
  • Rated current: 16 A
  • Rated voltage: 230 V AC
  • Mounting: DIN-rail compatible
  • Tripping type: thermal-magnetic overcurrent protection
  • Reset: manual reset after trip
  • Application: residential and light-commercial circuits

Parametry

Parametry
Dielektrická pevnost
4000 V
Hloubka
77.8 mm
Hmotnost
0.1 kg
Jmenovité napětí
230 V
Jmenovitý proud
16 A
Krytí (IP)
IP20
Neobsahuje
Halogenový
Počet pólů
1
Šířka
17.8 mm
Skladovací teplota (T-T)
-40 - 70 °C
Stupeň znečištění
2
Třída omezení energie
3
Typ
Typ C
Typ instalace
Lišta DIN
Typ jističe
Jistič
Vstupní frekvence
50 - 60 Hz
Vstupní napětí
240 - 415 V
Výška
88 mm
Vývoj ceny za posledních 6 měsíců
Legrand TX3 jistič miniaturní jistič typ C 1
Aktuální
482,78 Kč
Nejnižší 7 d.
475,24 Kč
Nejvyšší 7 d.
482,78 Kč
Změna za 24 h
0,00 Kč   0%
Změna za 7 d.
+7,53 Kč   +2%
Změna za 30 d.
+123,14 Kč   +34%

Napsat recenzi

Hodnocení *
Poznámka: HTML se nepřekládá!

Stejná řada a alternativy

12

Populární produkty v této kategorii

8
Prodávající: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litva · IČO 303192950 · DIČ LT100008198612 · Odesíláme z EU (Litva)
WhatsApp
Messenger
Dobrý den, jsem AI asistent DistriNode. Pomohu vám najít produkty, porovnat možnosti, vytvořit cenovou nabídku v PDF nebo otevřít požadavek na podporu.
Všechny kategorie