Účet Kontakt
Váš košík
DPD a FedEx – termín doručení najdete u produktu
Potřebujete poradit? Zeptejte se naší AI

Stupňovitý vrták Cimco 201200 pravotočivý 1 ks

Stupňovitý vrták Cimco 201200 pravotočivý 1 ks
Stupňovitý vrták Cimco 201200 pravotočivý 1 ks
6 996,20 Kč
PDF
PDF
Dostupnost Není sklademNení skladem Kód 2193202 Model 201200 Záruka 2 roky

Doprava a vrácení zboží

Položte otázku – AI asistent odpoví hned.

Popis

The Cimco 201200 step drill bit is a single-piece cutting tool designed for drilling with right-hand rotation. It features a stepped diameter profile that allows progressively larger holes to be made with a single tool, reducing tool changes and setup time. The bit is intended for use in common drilling operations where gradual hole enlargement, clean edge formation, and controlled chip evacuation are required.

Advantages

The stepped geometry enables multiple hole sizes from one tool, saving time and simplifying operations. Being a single-piece construction provides rigidity and consistent concentricity during drilling. Right-hand rotation design matches standard drill press and handheld drill configurations. The tool is suitable for producing smooth hole edges and helps reduce burr formation compared with repeated reaming or multiple twist drills.

Suitable for

Key specifications

How to use

Secure the workpiece firmly and mark the drilling position. Use appropriate clamping and, if necessary, a center punch to prevent walking. Select a suitable drilling speed based on material hardness and machine capability. Align the step drill bit with the marked point and apply steady feed pressure while maintaining tool alignment. Progress through the stepped diameters until the required hole size is achieved. Retract the bit periodically to clear chips and avoid overheating; use cutting fluid where recommended for the material.

Recommendations

Use correct drilling speeds and adequate clamping; for thin or soft materials run at higher speeds with light feed, and for harder materials reduce speed and apply cutting fluid to prolong tool life and improve hole quality.
Hlavní vlastnosti
  • Drilling and enlarging holes in sheet metal and thin plate materials
  • Creating progressively larger diameter holes without changing tools
  • Workshop and maintenance tasks using drill presses or handheld drills
  • Single-piece step drill geometry with multiple cutting diameters
  • Right-hand rotation cutting direction
  • Designed for manual and machine drilling applications

Parametry

Parametry
Barva produktu
Černá, nerezová ocel
Hmotnost
0.25 kg
Materiál vrtáku
Rychlořezná ocel (HSS)
Počet vrtáků
1 pc(s)
Průměr stopky
12 mm
Směr otáčení
Otáčení doprava
Správné použití
Vrtačka
Tvar stopky
Válcová stopka
Typ vrtáku
Stupňovitý vrták
Vhodné pro materiály
Aluminium, Brass, Copper, Plastic, Steel, Wood
Vývoj ceny za posledních 6 měsíců
Stupňovitý vrták Cimco 201200 pravotočivý 1 ks
Aktuální
6 996,20 Kč
Nejnižší 7 d.
6 996,20 Kč
Nejvyšší 7 d.
6 996,20 Kč
Změna za 24 h
+148,85 Kč   +2%
Změna za 7 d.
+178,30 Kč   +3%
Změna za 30 d.
0,00 Kč   0%

Napsat recenzi

Hodnocení *
Poznámka: HTML se nepřekládá!

Další produkty CIMCO v této kategorii

12

Populární produkty v této kategorii

8
Prodávající: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · IČO 303192950 · DIČ LT100008198612 · Odesíláme z EU (Litva)
WhatsApp
Messenger
Dobrý den, jsem AI asistent DistriNode. Pomohu vám najít produkty, porovnat možnosti, vytvořit cenovou nabídku v PDF nebo otevřít požadavek na podporu.
Všechny kategorie