Solární systém Offgridtec Solar-Direct 1800Wp HMT-2000-4T pro 3fázové napájení domovní sítě

The Offgridtec Solar-Direct complete system with 1,800 Wp module output and the three-phase Hoymiles HMT-2000-4T microinverter with 2,000 VA output power allows you to produce part of your required household electricity yourself and reduce your electricity costs. The grid connection and commissioning must be carried out by a qualified electrician.

• 4x Luxen Solar 450W bifacial solar module TopCon N5 Full Black
• 1x Hoymiles HMT-2000-4T microinverter, 3-phase
• With suitable connection cables for professional installation

The Solar-Direct complete systems from Offgridtec (MPN 015570) are an ideal way to produce part of your required household electricity yourself and thus reduce your electricity costs. The system includes four 450 W solar modules from Luxen Solar with a total of 1,800 Wp, a Hoymiles HMT-2000-4T microinverter with 2,000 VA output power, and the corresponding connection cables for professional installation.

• Scalable power: The system can be expanded with additional compatible HMT units if the technical design allows. The additional components and connection conditions required for this must be checked on a case-by-case basis.
• Important installation note: The solar system has an inverter nominal output power of 2,000 VA and is not intended for independent commissioning via a standard household socket. The connection to the power grid and commissioning must be carried out by a qualified electrician in compliance with the applicable electrical engineering regulations and technical connection conditions. The existing electrical installation must be checked for suitability before connection.

The 1800W Solar-Direct complete system contains

• 1x Hoymiles T-node set with AC cable 3m for HMT inverters
• 4x 3m 6mm² MC-4 connection cable male/female extension
• 1x Hoymiles HMT 3p-AC box disconnect tool
• 1x Hoymiles HMT 3p-AC box unlock tool
• 1x Hoymiles HMT 3p-AC box end cap
• Hoymiles HMT-2000-4T Microinverter 3-phase

Experience a powerful solution for your solar projects with the HMT-2000-4T microinverter from Hoymiles. This device offers an efficient way to use solar energy with its two MPP trackers with two inputs each, a 3-phase configuration, and an output power of up to 2,000 VA. With a recommended module power of 400 W to 670 W+ per module, the inverter is suitable for different PV module configurations.

• Luxen Solar 450W Bifacial TopCon N5

The bifacial 450W Full Black solar module of the Luxneri N5 series from Luxen Solar sets new standards in solar technology. It combines innovative technologies such as LECO N-TOPCon cell technology and a 96-cell half-layout to maximize efficiency. In addition, SMBB half-cut cell technology is used, which contributes to optimizing performance.

• System monitoring

Optional system monitoring is possible via the smartphone app S-Miles Enduser or the S-Miles Cloud. The data transmission unit DTU-PRO-S is required for this.

• Installation and grid connection in Germany

The solar system has a PV nominal power of 1,800 Wp and an inverter nominal output power of 2,000 VA. This exceeds the limit of 800 VA inverter power applicable to simplified plug-in solar devices and must be installed as a grid-connected PV system in accordance with the applicable technical regulations.

The three-phase connection to the house grid and commissioning must be carried out by a qualified electrician. This person checks the existing electrical installation and ensures a suitable, standard-compliant connection solution. Independent commissioning by plugging into a standard household socket is not intended for this set.

The system must be registered or reported in accordance with the applicable legal requirements and the requirements of the responsible grid operator. This includes in particular registration in the market master data register of the Federal Network Agency.